Table of Contents
Advertisement
3-12
Installation
Connecting an A/V Receiver, TV, and VCR
1
Connect an RF coaxial cable to the cable wall outlet and the
cable terminal.
2
Connect a stereo audio cable to the
the
and
INPUT R
L
3
Connect a video cable to the
connector on the A/V receiver.
VIDEO
4
Connect a stereo audio cable to the
and the
INPUT AUDIO R
5
Connect a stereo audio cable to the
VCR and the
VCR AUDIO IN R
6
Connect a video cable to the
connector on the A/V receiver.
OUT
7
Connect a video cable to the
connector on the A/V receiver.
IN
8
Connect a video cable to the
video connector on the A/V receiver.
OUTPUT
If you can:
Use the
OPTICAL SPDIF
outputs. In most cases, SPDIF offers better audio quality, including support for Dolby 5.1
Surround Sound.
Use the S-video connections instead of the standard RCA video connections. In most cases,
S-video offers better video quality.
This video connection method does not support HD video. For more information, see "Connecting
to an HDTV – Video Only."
DCT3412 Installation Manual
AUDIO OUT R
connectors on the A/V receiver.
connector on the cable terminal and the
VIDEO OUT
VCR AUDIO OUT R
and
connectors on the stereo VCR.
L
OUTPUT AUDIO OUT R
and
connectors on the A/V receiver.
L
INPUT VIDEO
OUTPUT VIDEO
INPUT VIDEO
or coaxial
SPDIF
CABLE IN
and
connectors on the cable terminal and
L
and
connectors on the A/V receiver
L
and
connectors on the stereo
L
connector on the stereo VCR and the
connector on the stereo VCR and the
connector on the stereo TV and the
outputs instead of the stereo
connector on the
/
CABLE
TV
VIDEO VCR
VIDEO VCR
/
TV
MONITOR
and
AUDIO R
L
Advertisement
Table of Contents
