Fiat Doblo Owner's Handbook Manual page 83

4) Lift part B-fig. 126 making the
shelf slide along the available space be-
hind the seat so that the upper part is
fastened to the rear window shelf and
the lower central part to the seat.
If the seat is down, proceed as fol-
lows:
5) Remove the shelf and arrange it
crosswise between the front seat
backs and the tipped seat on the rear
seat.
To refit the shelf, refit central catch-
es D-fig. 124 and tip first part B and
then part A, make sure shelves are
properly secured.
fig. 126
82
GETTING TO KNOW YOUR VEHICLE
IMPORTANT Check and adjust
the height of the dipped headlight
beam when travelling at night with a
rather heavy load in the boot (see
"Headlights" in this section).
To take the seat back to normal po-
sition:
1) Check that the seat belt webbing
is correctly fitted in its bracket.
2) Take the cushion to its horizontal
position and check that it is correctly
fastened.
3) Tip the seat back backwards and
check that it is correctly fastened.
B
7-seat versions
To extend the boot, proceed as fol-
lows:
– remove head restraints;
– release the right locking lever B-
fig. 127 moving it to 1 ("released
lever"); do the same on the left side
then lower the seat back and tip the
seat forward. This operation is made
friendly by two springs. Make sure the
seat is completely tipped.
– refit head restraints back into the
seats C-fig. 128.
fig. 127