Average Consumption (*); Instant Consumption; Average Speed; New Mission - Fiat Doblo Owner's Handbook Manual

Average consumption (*)

This value shows the average con-
sumption from the start of the new
mission.
(*) On Natural Power versions, for petrol con-
sumption only.

Instant consumption

This value shows instant fuel con-
sumption (this value is updated second
by second). If parking the vehicle with
engine on, the display will show "----".

Average speed

This value shows the vehicle average
speed as a function of the overall time
elapsed since the start of the new mis-
sion.
Travel time
This value shows the time elapsed
since the start of the new mission.
IMPORTANT Lacking information,
Trip computer values are displayed
with "----" When normal operating
condition is reset, calculation of dif-
ferent units will restart regularly. Val-
ues displayed before the failure will
not be reset.
TRIP button fig. 46 and fig. 47
(Natural Power versions)
Button TRIP shall be used (with ig-
nition key at MAR), to display and to
reset the previously described values
to start a new mission:
– short push to display the different
values
– long push to reset and then start
a new mission.

New mission

Reset can be:
– "manual" resetting by the user, by
pressing the relevant button;
– "automatic" resetting, when the
"Trip distance" reaches 3999.9 km or
9999.9 km (according to the type of
display) or when the "Travel time"
reaches 99.59 (99 hours and 59 min-
utes);
– after disconnecting/reconnecting
the battery.
IMPORTANT The reset operation
in the presence of the screens con-
cerning the "General Trip" will also re-
set the "Trip B". The reset operation
in the presence of the screens con-
cerning the "Trip B" makes it possi-
ble to reset only the information as-
sociated with this function.
GETTING TO KNOW YOUR VEHICLE
37