Side Direction Indicators; Rear Light Cluster - Fiat Doblo Owner's Handbook Manual

SIDE DIRECTION
INDICATORS
To change the bulb, proceed as fol-
lows:
1) Press the lens A-fig. 24 in the di-
rection of the arrow so to compress
the clip and remove the cluster.
2) Turn the bulb holder counter-
clockwise, remove the snap-fitted bulb
and replace it.
fig. 24
134
IN AN EMERGENCY

REAR LIGHT CLUSTER

To replace a bulb, proceed as fol-
lows:
Versions equipped with rear
brackets:
1) Working inside the vehicle: re-
move the plastic cover fig. 25 set on
the speaker seat fitting the screwdriv-
er under the plastic and making it slide
in parallel with the slot to spring the
2 front catches, pull the plastic cover
parallel with the supporting surface to
spring the rear catch and then remove
the upper plastic cover A-fig. 26 us-
ing the screwdriver provided, in order
to make visible the fastening bolt B of
the light unit.
fig. 25
Versions not equipped with rear
brackets:
1) Act from inside the vehicle to re-
move upper plastic cap C-fig. 27 by
means of the screwdriver available, so
that light cluster fastening bolt D is
made visible.
A B
fig. 26
C D
fig. 27