Shooting With The Fe Lock - Canon EOS M10 User Manual

Shooting with the FE Lock

Just as with the AE lock ( = 64), you can lock the exposure for flash
shots.
1
Raise the flash and set it to [ ]
(= 76).
2
Lock the flash exposure.
● Aim the camera at the subject to shoot
with the exposure locked, and then press
the [ ] button.
● The flash fires, and when [ ] is displayed,
the flash output level is retained.
● To unlock FE, press the [ ] button again.
[ ] is no longer displayed.
3
Compose the shot and shoot.
● FE: Flash Exposure
● The metering range is shown by a circle in the center of the
screen when FE is locked.
● [ ] blinks when standard exposure is not possible (even if the
flash fires in step 2). Follow step 2 when subjects are within range
for flash shots.
Changing the Flash Timing
Still Images Movies
Change the timing of the flash and shutter release as follows.
1st curtain
2nd curtain
Changing the Flash Metering Mode
[Evaluative] flash metering, which enables standard flash exposure, can
be changed to average flash metering across the metering area, as when
using an externally metered flash.
Still Images
● Press the [ ] button, choose [Flash
Control] on the [ 3] tab, and then
choose [Built-in flash settings].
● Choose [Shutter Sync.], and then choose
the desired option ( = 32).
The flash fires immediately after the shutter opens.
The flash fires immediately before the shutter closes.
● [1st curtain] is used whenever the shutter speed is 1/100 or faster,
even if you select [2nd curtain].
Still Images
● Press the [ ] button and choose
[Flash Control] on the [
[E-TTL II meter.] and then [Average].
Before Use
Basic Guide
Movies
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Movies
Appendix
Index
3] tab. Choose
78