Auto - Canon EOS M10 User Manual

● When there is a risk of overexposure, the camera automatically
adjusts the shutter speed or ISO speed for flash shots to reduce
washed-out highlights and shoot at optimal exposure. Thus,
shutter speeds and ISO speeds displayed when you press the
shutter button halfway may not match the settings in flash shots.
You can also configure this setting by choosing MENU ( = 32)
●
> [ 3] tab > [Flash Control] > [Flash firing].

Auto

Fires automatically in low-light conditions.
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. In this case,
also disable image stabilization ( = 79).
● In [ ] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Off
For shooting without the flash.
Adjusting the Flash Exposure Compensation
Just as with regular exposure compensation ( = 63), you can adjust the
flash exposure from –2 to +2 stops, in 1/3-stop increments.
● Raise the flash, press the [ ] button and
immediately turn the [
the compensation level, and then press
the [ ] button.
● The correction level you specified is now
displayed.
● You can also configure the flash exposure compensation by
accessing MENU ( = 32) and choosing [
Control] > [Built-in flash settings] > [
You can also access the [Flash Control] screen ( = 32) when
●
the flash is up by pressing the [ ] button and immediately
pressing the [ ] button.
You can also access the [Flash Control] screen ( = 32) by
●
pressing the [ ] button and touching [
Before Use
Basic Guide
Still Images Movies
Advanced Guide
Camera Basics
] dial to choose
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
3] tab > [Flash
Playback Mode
exp. comp.].
Wi-Fi Functions
Setting Menu
Accessories
].
Appendix
Index
77