Recording Movies in Movie Mode
1
Enter [
] mode.
●
Set the mode switch to [
●
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
●
Touch [
], turn the [
[
], and then touch [
●
To confirm your choice, touch [OK].
2
Configure the settings to suit the
movie (= 170).
3
Shoot.
●
Press the movie button.
●
To stop movie recording, press the movie
button again.
●
The display area narrows and subjects are enlarged in [
with a Dynamic IS-compatible lens attached ( = 80).
Still Images
Movies
].
Shooting Still Images during Movie Recording
Shoot still images during movie recording as follows.
] dial to choose
].
] mode
●
To switch between recording with auto focus and a fixed focus,
touch [
] on the screen before or during recording. (Auto
focus is indicated by a green [
] in the upper left of the [
icon.) Note that this icon is not displayed when [Movie Servo AF]
( = 38) is set to [Disable] on the [
5] tab of the menu.
Still Images
1
While shooting a movie, focus on a
subject.
●
Press the shutter button halfway to
readjust the focus and exposure. (The
camera will not beep.)
●
Movie recording will continue.
2
Shoot.
●
Press the shutter button all the way
down.
●
Your shot will be recorded.
●
Shooting still images during movie recording may not be possible
when the memory card's recording speed is slow, or when there is
not enough free internal memory.
●
Shutter sounds are recorded in movies.
●
If the camera cannot focus on subjects when you press the
shutter button halfway, an orange AF frame is displayed with [
and no picture is taken if you press the shutter button all the way
down.
●
The flash does not fire.
●
Movie recording may stop if shooting still images fills up the
internal memory.
Before Use
Basic Guide
]
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Movies
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
],
59