Perform A System Restore; Adjust The Touchpad Properties; Display Problems - Toshiba Portege Z20-B Series User Manual

134
If Something Goes Wrong

Display problems

Perform a system restore

You can perform a system restore to a period in time at
which the touchpad was working properly.
NOTE
1 In the
restore point
2 Click or touch
3 Select the
protection
4 Select
different restore point
at which your touchpad was working properly.

Adjust the touchpad properties

1 In the
settings
2 Click or touch
NOTE
3 You can now change the configuration settings of your
touchpad.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press the
+ (
FN
the
FN
previous setting.
If no restore points have been previously created then
this method will not work, see
configuration with restore points" on page
field on the taskbar, type
Search
.
Create a restore point
System Restore
tab.
Recommended Restore
field, type
Search
.
Change your mouse settings
Some devices may have an
to change the touchpad properties.
) keys. If this does not correct the problem, press
+ ( ) keys again to return the display priority to its
"Saving system
button on the
or
Choose a
to restore the system to a point
Change your mouse
Advanced
154.
Create a
.
System
.
tab (or similar)