Connect A Bluetooth Phone; Advanced Voice Recognition System; Train Voice Recognition; Voice Recognition Tutorial - Toyota 2015 Corolla Owner's Manual

CONNECT A BLUETOOTH PHONE

Pairing your phone is the first step in connecting with your Toyota for hands-free calling and for audio
streaming via Bluetooth. The pairing process is quick and easy: all iPhone mobile digital devices and
Android smartphones have Bluetooth integrated; all you have to do is setup the phone and multimedia
system to "talk" to each other and form a connection. Let's get started, first insure that your phone
Bluetooth setting is turned on, then follow the steps below.
1
Begin by pressing the APPS button
step
and touch the Set Up icon
on the faceplate,
followed by .
3 Go to your phone and access Bluetooth
step
settings, touch the device to be paired.
Confirm the PIN and hit "OK." Once you
have connected the Bluetooth device,
it is automatically connected whenever
the engine switch is in the "ACC" or
"ON" position.*
* For detailed pairing instructions, see your audio system owner's manual.
7
2
step
Press on the display
screen.
4 Upon connection, the system will
step
indicate that the pairing process was
successful.
Quick Tip -Up to four Bluetooth devices can be
paired. A paired device can be connected to any
of its supported profiles such as phone, music
and/or internet.

ADVANCED VOICE RECOGNITION SYSTEM

VOICE RECOGNITION TRAINING AND TUTORIAL
Before you begin using the voice recognition system, it is recommended that you access "Train Voice
Recognition" and "Voice Recognition Tutorial" in the Set Up menu. Voice recognition training is a feature
that will help train the voice recognition system to better understand your voice. For best results, it is
recommended that voice recognition training be done when there is minimal background noise. The
voice recognition tutorial will give an overview of how to use the voice recognition system, including how
to make calls and how to customize your experience.

TRAIN VOICE RECOGNITION

1
step Press the Set Up icon
faceplate followed by
Then select

VOICE RECOGNITION TUTORIAL

1
step Press the Set Up icon
faceplate followed by
Then select
2
on the step
Follow the system prompts and repeat
a series of phrases after each beep.
.
You will also be able to select the
desired level of system guidance.
2
Select desired tutorial program to run.
on the step
.
8