Shift position purpose
Shift position
P
R
N
D
S
B
*
: To improve fuel efficiency and reduce noises, set the shift lever in D for
normal driving.
Eco drive mode (if equipped)
Press the switch.
Suitable for enhancing the fuel
economy, because the torque cor-
responding
pedal depression amount can be
generated more smoothly than it is
in normal conditions and the oper-
ation of the air conditioning system
(heating/cooling) will be minimized.
Press the switch again to return to
normal mode.
When driving with cruise control activated
■
Even when performing the following actions with the intent of enabling engine
braking, engine braking will not activate while downshifting to S because
cruise control will not be canceled. ( P. 197)
If the shift lever cannot be shifted from P
■
P. 527
CAUTION
When driving on slippery road surfaces
■
Be careful of downshifting and sudden acceleration, as this could result in
the vehicle skidding to the side or spinning.
COROLLA_TMMMS_TMMC_U (OM12F00U)
Parking the vehicle/starting the engine
Maximum engine braking
to
the
accelerator
4-2. Driving procedures
Objective or function
Reversing
Neutral
*
Normal driving
Engine braking
175
4