264
5-7. "SET UP" menu
Changing the passkey
Select "Passkey" using
1
Input a 4 to 8-digit passkey using
2
Input the number 1 digit at a time.
When the entire number to be registered as a passkey has been
3
input, press
If the passkey to be registered has 8 digits, pressing
necessary.
Setting automatic connection of the device on or off
If "BT power" is set to on, the registered device will be connected
automatically when the engine switch is turned to the "ACC" position
(vehicles without a smart key system) or ACCESSORY mode (vehi-
cles with a smart key system).
Select "BT Power" using
1
Select "ON" or "OFF" using
2
COROLLA_TMMMS_TMMC_U (OM12F00U)
. ( P. 258)
again.
. ( P. 258)
.
.
again is not