ECS P41G Series User Manual page 26

Boot Up NumLock Status
This item determines if the NumLock key is active or inactive at system start-up
time.
APIC Mode
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP)
for systems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
Hard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Hard Disk Drives
1st Drive
: Move Enter: Select +/-/: Value
F1: General Help
Press <Esc> to return to Advanced Setup screen.
Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Removable Drives
1st Drive
: Move Enter: Select +/-/: Value
F1: General Help
Press <Esc> to return to Advanced Setup screen.
Chapter 3: BIOS Setup Utility
Hard Disk Drives
Specifies the boot
ST31000340AS
sequence from the
available devices.
F10: Save Esc: Exit
F9: Load Default Settings
Removable Drives
Specifies the boot
1st FLOPPY DRIVE
sequence from the
available devices.
F10: Save Esc: Exit
F9: Load Default Settings
23
Help Item
Help Item