ECS P41G Series User Manual page 22

Follow the steps below to install an PCI Express/PCI expansion card.
1 Locate the PCI Express or PCI slots on the motherboard.
2 Remove the blanking plate of the slot from the system chassis.
3 Install the edge connector of the expansion card into the slot. Ensure
the edge connector is correctly seated in the slot.
4 Secure the metal bracket of the card to the system chassis with a
screw.
PCI Express Slot
You can install an external PCI Express graphics card that is fully compliant to the
PCI Express Base Specification revsion 1.0a.
PCI Slots
You can install the 32-bit PCI interface expansion cards in the slots.
Chapter 2: Motherboard Installation
19