ECS P41G Series User Manual page 14

CLR_CMOS: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You may need to
clear the CMOS memory if the settings in the Setup Utility are incorrect and
prevent your motherboard from operating. To clear the CMOS memory,
disconnect all the power cables from the motherboard and then move the jumper
cap into the CLEAR setting for a few seconds.
Function
1
Normal
CLR_CMOS
Clear CMOS Short Pins 2-3
Note: To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Optimal De-faults"
and then "Save Changes and Exit".
USBPWR_F: FRONT PANEL USB POWER SELECT Jumper
1
USBPWR_F
USBPWR_R: REAR USB PS/2 POWER SELECT Jumper
Use this jumper to set the Rear USB PS/2 Power function.
1
USBPWR_R
Note: Make sure the power supply provides enough SB5V voltage before
selecting the SB5V function.
Chapter 2: Motherboard Installation
Jum per Setting
Short Pins 1-2
Function Jum per Setting
VCC Short Pins 1-2
5VSB Short Pins 2-3
Function Jum per Setting
VCC Short Pins 1-2
5VSB Short Pins 2-3
11