Central Heating - Viessmann Vitotronic 200 KW2 Operating Instructions Manual

Modifying and scanning time programs

Central heating

Press the following keys:
1. !, ? or §; the respective key
will then illuminate.
2. A for "Central heating time
program".
Please note:
If you want to terminate the time
program early, press A again
and confirm with d.
3. a/b to
"1 7" will be displayed, if
you want to set up the
same time phases for all
weekdays
C H time program
1-7
or
"Mo", "Tu" etc. will be
displayed, if you want to
set different time phases
for the displayed weekday.
C H time program
Mo
18
Please note:
If different time phases are set
for individual weekdays, and you
want to set up identical time
phases for all weekdays, press
d if the display shows "1 7".
All time phases are returned to
their original condition
(see page 17).
4. d for confirmation; "Central
heating time phase 1" will
then be displayed.
Press a if you want to skip a
time phase.
5. d for confirmation; "Central
heating time phase 1 ON"
will then be displayed.
6. a/b for the start time of the
heating phase.
7. d for confirmation; "Central
heating time phase 1
OFF" will then be
displayed.
8. a/b for the end time of the
heating phase.
9. d for confirmation; "Central
heating time phase 2 ON"
will then be displayed.
10. Proceed for the setting up of the
start and end of heating phases
2 to 4 as under points 6 to 9.