Scanning Temperatures And Operating Conditions - Viessmann Vitotronic 200 KW2 Operating Instructions Manual

Quick start

Scanning temperatures and operating conditions

Subject to connected components and settings made, you can scan current
temperatures and operating conditions.
H Holiday program with departure
and return date, if programmed.
H Outside temperature
H Boiler water temperature
H Flue gas temperature,
if a sensor is installed.
H Domestic hot water temperature
H Flow temperature,
for heating circuit with mixer.
H Return temperature,
for heating circuit with mixer,
subject to a sensor being installed.
H Room temperature,
if a Vitotrol remote control is
installed.
H Hours run of the burner
H Number of burner start-ups
H Fuel consumption subject to the
appropriate settings having been
made by the heating contractor.
H Time
H Date
H Burner On/Off
H Cylinder loading pump On/Off
H DHW circulation pump On/Off
H Heating circuit pump On/Off
H Mixer open/closed
for heating circuit with mixer
0 ¢ Close(d)
1 to 99 (%)
100 ¢ Open
H Language
12
Press the following keys:
1. !, ? or §; the respective key
will then illuminate.
2. c for "Outside temperature".
Outside temperature
i
3. a/b for further scans.
4. c to end scanning.
Heating program, scan party or
economy mode
Press heating circuit selection key;
the key of the active heating
program will illuminate (see
page 9).
9
º C