F. Ar-Sm5/Sm6 - Sharp AR-M236 Service Manual

(3) Mounting the additional memory
Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1) Remove the shielding plate.
Remove the five screws and remove the shielding plate.
Screws
Screws
2) Mount the memory module.
Insert the memory module until it clicks.
The memory module is lock when it is inserted. However, be sure
to check that the module slit is engaged with the connector rib
when it is inserted.
Memory module
(S.O.DIMM)
3) Reattach the shielding plate.
Reattach the shielding plate using the five screws.
Screws
Screws
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 9

F. AR-SM5/SM6

(1) Parts included
AR-SM5
256MB SDRAM memory module
(168 pin DIMM): 1 pc.
Installation caution sheet
(2) Installation procedure
Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1) Remove the shielding plate.
Remove the screw and remove the cabinet.
2) Attach the SDRAM memory module.
Attach the SDRAM memory module to CN1 and CN2 of the IMC
board.
When only one SDRAM memory module is used, attach it to CN1.
CN2
CN1
AR-SM6
512MB SDRAM memory module
(168 pin DIMM): 1 pc.
Installation caution sheet