Auto Connection - Motorola B801 User Manual

mobile phone(s) paired up, sequence number
(depending on which Bluetooth button you just pressed and
held) will also be displayed.
If you would like to pair another Bluetooth device, please
repeat the steps above. Be sure to activate a Bluetooth
button which is NOT paired to another Bluetooth device
(indicated by the Bluetooth LED light on the base being
OFF). If you activate a Bluetooth button which is already
paired to another Bluetooth device (indicated by the
Bluetooth LED light on the base being ON) this will terminate
the connection of the Bluetooth device that was attached
and start the process to connect a new Bluetooth device.

Auto connection

Once you have paired a device with the telephone base, the
pairing information is stored in the telephone base. If the
paired device becomes disconnected, the telephone base
will automatically search and re-connect to that device. If the
connection does not resume in a minute, you will need to re-
connect to that device manually, refer to the section below
for details.
20
Manual connection
or
To manually re-connect a paired device, make sure the
Bluetooth feature is turned on in your Bluetooth enabled
mobile phone, select Motorola B801/B802/B803/B804/
B805 from the paired device list in your Bluetooth enabled
mobile phone. Once the connection is established again, the
corresponding Bluetooth button which you used to pair up
the Bluetooth device on the telephone base will turn back on.
Turning off the auto connection
If you do not want the telephone base to re-connect to a
paired device automatically after it is disconnected, you can
turn off the auto connection feature manually. In order to turn
off the auto connection, you will need to initiate a
disconnection from the paired Bluetooth enabled mobile
phone; this will transmit a signal to the telephone base and
disable the auto connection.
While the Bluetooth enabled mobile phone is connected to
the telephone base, find the Bluetooth enabled mobile
phone's Bluetooth device list and select Motorola B801/
B802/B803/B804/B805 to manually disconnect the device.
(If disconnection is not an option on your Bluetooth enabled
Using the phone