Auto Connection; Connect A Paired Cell Phone Or Headset - Motorola XT801 User Manual

Getting to know
your phone
The pairing process may take up to
one minute. If the pairing process
fails, turn off the Bluetooth feature
on your headset and on the
XT801/XT802/XT811/XT821/
XT822/XT831/XT8 by pressing
CELL 2. Then repeat the steps
above to pair and connect again. In
some cases, it may take you a few
attempts to complete the pairing
process.
When a connected headset is
charging, it may disconnect from
the telephone base and the
CELL 2 light on the telephone
base turns off. For some headset
models, you may need to turn on
the headset and reconnect it to
the telephone base again.
19

Auto connection

A cell device may be
disconnected from the telephone
base when:
• The Bluetooth feature of
your connected cell device is
turned off.
• The power of your cell device
is turned off.
• Your cell device is not within
range of the telephone base.
After the cell device is
disconnected, wait for about 1
minute. Then, power on the cell
device, turn on the Bluetooth
feature, or move it within range
of the base, the base will try to
reconnect to the cell device. If
you disconnect the cell device
from the cell devices list,
the base will not attempt to
reconnect unless your cell device
is moved out of range and back
in range again.
Note
• If your cell device does
not reconnect to the base
automatically, follow the section
below to connect it manually.
Connect a paired cell
phone or headset
If you need to connect your
paired cell phone or headset to
the telephone base manually:
CELL 1 and/or
1. Press
CELL 2 on the telephone
base when it is not in use. The
CELL 1 and/or
light flashes.
2. When the cell phone or
headset is connected to the
telephone base, you hear two
beeps. The corresponding
status icon (
or
1
2
The corresponding device light
CELL 1 and/or
(
turns on.
CELL 2
) displays.
CELL 2 )