Motorola B801 User Manual page 13

Flashes when another telephone is in use on the same line,
or when you are de-registering handset(s) from the base.
Flashes rapidly when there is an incoming call.
3 BLUETOOTH LEDs – BLUE
Steadily ON: Bluetooth device is paired to the base.
Flashes: Bluetooth device is during the pairing up process.
(Only one LED corresponding to the Bluetooth key will
behave as above at the same time.)
OFF: If Bluetooth device is disconnected.
4 VOLUME +
Increase the loudspeaker volume by one level (1 to 8)
volume during message playback.
In Idle or during call screening: Base speaker volume levels
1 to 8 are available. (Level 1 means speaker volume off)
5 DELETE
During message playback: Delete the current message.
In Idle: Press and hold to erase all read messages
(applicable only when messages in answering machine are
all read)
6 SKIP FORWARD/ MEMO
During message playback: Press to skip to play the next
message.
In Idle: Press and hold to start recording a memo after
hearing a long beep. Release key to stop memo recording.
Getting to know your phone
7 PLAY/ STOP
In message playback mode: Press to playback or stop
playing messages.
8 VOLUME –
Decrease the loudspeaker volume by one level (1 to 8)
during message playback.
In Idle or during call screening: Base speaker volume levels
1 to 8 are available. (Level 1 means speaker volume off)
9 SKIP BACKWARD
During message playback: Press once to repeat the
currently playing message. Press twice to playback the
previous message.
10 ANNOUNCE
In Idle: Short press to play the current announcement.
Press and hold to start recording the personalized
announcement of the current answer mode after hearing a
long beep. Release key to stop recording.
11 ANSWER ON/OFF/ ANNOUNCE MODE
Toggle among: Switch the answering machine on/off.
12 CHARGING CRADLE
13