Table of Contents
Advertisement
English
TAB 2
Troubleshooting
Problem
No power
• Unplug the Acoustimass
• Make sure the power cord is inserted securely into the Acoustimass module.
• Reconnect the power cord firmly into an operating AC wall outlet. The green LED should flash 10 times,
then extinguish (the system will then be in standby).
• Make sure the interface module is plugged into the Acoustimass module properly.
• Make sure you use the remote control to power on the system.
No sound
• Make sure the CineMate
lit when the system is on.
• Increase the volume.
• If your system is a CineMate GS series II, make sure you pressed the remote button for the source you want
to hear.
• Make sure the interface module and speaker cables are both firmly connected to the Acoustimass module.
• Check the connections on the back of the speakers.
• If using a source device other than the TV, make sure the device is turned on and is playing.
TAB 3
TAB 4
®
module power cord from the AC wall outlet for one minute.
®
system turned on. The green LED on the front of the interface module should be
TAB 5
TAB 6
What to do
TAB 7
TAB 8
C
M
ARE AND
AINTENANCE
33
Hide quick links:
Advertisement
Table of Contents
