Fujitsu PRIMERGY RX2530 M1 Operating Manual page 62

Starting up and operation
Pos. Symbol
8
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing off
blue flashing orange flashing
62
Indicator Status
green on
AC
connected
indicator
off
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
Operating Manual
Description
is on in the following cases:
– the system is in power-off
mode but connected to the
mains (AC connected)
– the system has been switched
on and is in power-on delay
I
After connecting the server
to the mains it takes about
60 seconds until the server
enters the standby mode.
is off in the following cases:
– the system is not connected to
the mains
– the system is powered on and
in normal operation (S0)
RX2530 M1