PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
6
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
1. Screw
2. License plate light unit
2. Remove the license plate light
[ECA11192]
6-38
by removing the screws.
bulb socket (together with the
bulb) by pulling it out.
EAU24314