Adjusting The Engine Idling Speed - Yamaha FZ8-N Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Fuel tank overflow hose
2. Original position (paint mark)
3. Clamp
4. Fuel tank breather hose
11. Install the fuel tank bolt on both
sides.
6
12. Place the fuel tank cowling in the
original position.
13. Install the cowling bolts on both
sides.
14. Install the rider seat.
3
4
2
1
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn
the screw in direction (a). To decrease
the engine idling speed, turn the screw
in direction (b).
1. Idle adjusting screw
6-16
EAU34302
(a) 1
(b)