Multi-Function Meter Unit - Yamaha FZ8-N Owner's Manual

Multi-function meter unit

1 2 3
8 7 6 5
1. Fuel meter
2. Coolant temperature display
3. Speedometer
4. Tachometer
5. Odometer/tripmeter/fuel reserve tripmeter
6. "SELECT" button
7. "RESET" button
8. Clock
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
INSTRUMENT AND CONTROL FUNCTIONS
The multi-function
EAU46766
equipped with the following:
 a speedometer
4
 a tachometer
 an odometer
 two tripmeters (which show the
distance traveled since they were
last set to zero)
 a fuel reserve tripmeter (which
ABS
shows the distance traveled since
the left segment of the fuel meter
started flashing)
 a clock
 a fuel meter
 a coolant temperature display
 a self-diagnosis device
TIP
 Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
EWA12423
SET" buttons.
 For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
ters and
"SELECT" button for at least one
second.
meter unit is Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rid-
er to monitor the engine speed and
keep it within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
NOTICE
Do not operate the engine in the ta-
miles, press the
chometer red zone.
Red zone: 11500 r/min and above
3-8
1
2
3
ABS
ECA10032