Main Screen; System Mode; Set Day And Time - Bryant SYSTXBBECW01-A Owner's Manual

MAIN SCREEN

The main screen is where most interactions will take place. Touch anywhere on the
Home screen to arrive at the main screen.

System Mode

Once in the main screen,
S
To access your system mode touch the MODE label located in the upper
S
right of the control.
The drop- - down menu will allow you to choose between AUTO, HEAT,
S
COOL, FAN ONLY and OFF, depending on the equipment installed in
your system.
If OFF is selected your system will not control temperatures, humidity,
S
or fan.
If AUTO is selected, the Evolution Connex Control automatically
S
switches between heating and cooling to maintain your comfort during
transitional seasons.
NOTE: To save energy, AUTO mode is intended to switch between Heating and
Cooling modes from day to day, not within an hour, for example, time frame. The
®
Evolution Zoning System is not designed to satisfy simultaneous Heat and Cool
demands in different zones, in an effort to limit the effect of competing Heat/Cool
zones on excess energy usage.
If HEAT is selected then the Evolution Connex Control operates only the
S
heating system.
If COOL is selected then the Evolution Connex Control operates only
S
the cooling system.
If FAN ONLY is selected, then the Evolution Connex Control operates
S
the indoor fan but heating, cooling, humidification or dehumidification
will not take place.
5