Lorex LNR110 Series Instruction Manual page 180

21 LNR110 Series Troubleshooting
Error Possible Causes
• Mouse not detected by •
system.
•
•
• My system does not •
seem to be recording.
• The system beeps at •
startup.
• I am not receiving email •
notifications.
•
•
#LX400070; r. 1.0/27147/27147; en-US
Solutions
Mouse cable is not • Firmly connect the mouse cable to the
firmly connected to the system.
system.
Mouse is not con-
nected to the system.
• Re-connect the power cord to restart
System needs to be
reset. the system.
Recording may be • Right-click in live view, and click Record.
disabled. Ensure that each channel is set to
Schedule or Manual. If schedule is se-
lected, make sure schedule settings are
correct under Schedule.
ATTENTION: For security, it is highly
recommended to keep Continuous Re-
cording ON at all times.
The beep at startup is
normal.
Email notification is • Ensure you have configured email noti-
disabled. fication. See 13.3.5 Configuring Email
Alerts, page 56 for details.
Default setting is dis- • If you want to use your own SMTP serv-
abled, but you have not er, deselect the Default box, and enter
entered your own
your SMTP Server address, Port, User
SMTP information. name, and Password in the respective
fields.
Send Email setting not • Make sure that Send Email is checked
enabled in Motion for cameras you wish to receive email
menu. notifications from. See 13.3.8 Configur-
ing Motion Detection, page 59 for
details.
170