EXTERIOR LIGHTING AND SIGNALS
Lights-on reminder buzzer
If the lights are on after the engine is
switched off, a warning beep sounds
when the driver's door is opened to
warn you that the lights are still on.
1.78
(4/5)
"See-me-home lighting"
function
This function allows you to briefly switch
on the dipped beam headlights (to pro-
vide light when opening a gate, etc.).
With the engine switched off, the
lights off and ring 3 in position 0 or,
depending on the vehicle, AUTO, pull
stalk 1 towards you: the dipped beam
headlights come on for approximately
thirty seconds. To increase this du-
ration, you may pull the stalk up to
four times (total time restricted to two
minutes). The message "See-me-
home _ _ _" along with the time the
lights will be on for is displayed on the
instrument panel to confirm this action.
You can then lock your vehicle.
To switch off the lights before they go
out automatically, turn ring 3 to any po-
sition, then return it to the AUTO posi-
tion .