Renault Scenic Driver's Handbook Manual page 82

EXTERIOR LIGHTING AND SIGNALS
Automatic main beam
headlights
Depending on the vehicle, this system
switches the main beam headlights on
and off automatically. The function uses
a camera located behind the interior
rear-view mirror to detect vehicles that
are following and coming in the oppo-
site direction.
The main beam headlights come on au-
tomatically if:
– exterior light is weak;
– no other vehicles or lighting are de-
tected;
– the vehicle speed is above approxi-
mately 30 mph (45 km/h).
If any of the above conditions are not
fulfilled, the system switches to dipped
beam headlights.
Using the portable naviga-
tion system at night in the
windscreen area below the
camera may disturb the op-
eration of the "automatic main beam
headlights" system (risk of reflection
on the windscreen).
1.76
(2/5)
Activation
Turn ring 3 until the AUTO symbol is op-
posite mark 2.
Pull stalk 1 to activate main beam
headlights.
Warning light comes on the in-
strument panel.
Deactivation
– pull stalk 1 again;
or
– turn ring 3 to a position other than
AUTO.
Warning light goes out on the in-
strument panel.
Turning on the fog lights deactivates
the system and prevents it from
being activated.
The "automatic main beam headlights" system should under no circum-
stances be used to replace driver attention and responsibility with regard
to vehicle lighting and adapting to light, visibility and traffic conditions.
Operating faults
When the message "Check auto light-
ing" appears on the instrument panel,
the system is deactivated.
Consult an approved dealer.
The system may encounter difficul-
ties under certain conditions, includ-
ing:
– extreme weather conditions (rain,
snow, fog, etc.);
– obstruction in front of the wind-
screen or camera;
– when a following or oncoming ve-
hicle has weak or hidden lighting;
– incorrect settings for the front
headlights;
– reflecting systems.