Renault Scenic Driver's Handbook Manual page 71

ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
On-board computer with mileage-
before-service message
SERVICE
INTERVALS
Resetting: to reset the distance before service, press and hold button 2 or 3 for approximately 10 seconds until the display
shows the service mileage without flashing.
NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
(3/5)
c) Mileage before service or oil change.
Service in
30 000 Kms /
12 Months
Service due in
300 Kms / 24 days
Service required
Interpreting the display selected
Mileage before service
With the ignition switched on and the engine not running,
when the message "Mileage before next service" is displayed,
press button 2 or 3 for around 5 seconds to display the mile-
age before the next service (distance or time remaining before
the next service). When the distance value approaches its limit,
there are several possible scenarios:
– distance/time remaining less than 900 miles (1,500 km) or
one month: the message "Service due in" is displayed ac-
companied by the nearest term (distance or time);
– distance equal to 0 miles or service date reached: the
message "service vehicle" is displayed accompanied by the
©
warning light.
The vehicle requires a service as soon as possible.
1.65