Wheel Trim - Renault Scenic Driver's Handbook Manual

TOOLS

/WHEEL TRIM

(2/2)
8
9
7-seater version
The tools are in the compartment 9 of
the boot: lift the third row rear right-
hand seat, pull the tab 8, then take out
the bag containing the tools.
To put it back, fold the jack fully, then
store and replace the tool bag in its
housing. Check that the assembly is
correctly positioned (to avoid noise).
5.10
11
10
5-seater version
Lift the boot carpet 10, and secure it
with the hook.
The tools are found in the support 11.
D
B C
A
12
Wheel trim
Remove it using the hubcap tool 4 by
connecting the hook in the recess pro-
vided next to the valve 12 (to attach the
metal clip).
To refit the wheel trim, align it with
valve 12. Push the retaining hooks in
fully, starting with side A near the valve,
followed by B and C, finishing at D op-
posite the valve.
Note: if you are using anti-theft bolts,
please refer to the information on
"Changing a wheel".