Troubleshooting - Bissell SPOTCLEAN PROHEAT 9749 SERIES User Manual

Troubleshooting

Problem Possible causes
Spray nozzle clogged
Clean water/solution tank empty
Reduced
Clean water/solution tank insert
spray or
clogged
no spray
Pump needs priming
Poor upholstery/carpet
tool position
Dirty water tank is full
Spot cleaner
won't pick
Upholstery/carpet tool brush worn
up cleaning
Excess solution in flex hose
solution
Incorrect cleaning formula
Formula trigger is being pulled
when tool is above carpeting
Deep Stain
Tool is
Over-Spraying
Formula
(Formula is
Spraying
Deep Stain Tool is being used on
Out the Sides)
upholstery
Please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Clean spray nozzle using an unfolded
paper clip
Check/fill tank
Clean insert at bottom of clean water/
solution tank
Gently lift clean water/solution tank
while depressing the spray trigger
OR gently squeeze clean tank while
depressing spray trigger
Reposition upholstery/carpet tool
on surface, follow recommended
cleaning procedures
Empty dirty water tank
Replace with new brush
Lift tool and point upwards to allow
water in hose to flow into the dirty
water tank
Use BISSELL 2X Portable Machine
formulas only
Make sure the Deep Stain Tool's for-
mula injection needles are burrowed
deeply within your carpeting before
pressing the formula spray trigger. To
avoid over-spraying, make sure the
tool stays in direct contact with the
carpet at all times.
The Deep Stain Tool is designed for
high-pile carpets and rugs. Switch to
the 3" Tough Stain Tool for upholstery
cleaning.
www.BISSELL.com
9