Related Manuals for Bissell SPOTCLEAN PROHEAT 2694 Series
Summary of Contents for Bissell SPOTCLEAN PROHEAT 2694 Series
- Page 1 SPOTCLEAN ™ PROHEAT® _______________ USER GUIDE 2694 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.ca/ videos...
-
Page 2: Safety Instructions
»Do not use for any purpose other than described from the accessory before it is scrapped. »Use only BISSELL® cleaning products intended in this user guide. Use only manufacturer’s »Never put batteries in mouth. If swallowed, for use with this appliance to prevent internal recommended attachments. -
Page 3: Table Of Contents
Thanks for buying a BISSELL® portable carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your portable carpet cleaner works as well in three years as it does today, so this guide has tips on using, maintaining, and if there is a problem, troubleshooting. -
Page 4: Product View
7. Quick Release Cord Wrap 2. Power Button 8. Hose Grip Bracket 9. 9. Additional Tool Storage* 3. Dirty Water Tank 4. Flex Hose and 3” Tough Stain Tool 5. Flex Hose Clip *select models only 6. Power Cord www.BISSELL.ca... -
Page 5: Cleaning Formula
Cleaning Formula WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL® cleaning formula intended for use with this machine. Use Professional formula for optimal Keep plenty of genuine cleaning results! BISSELL®... -
Page 6: Operations
Clean Water/Solution models) into the back between the Cord Tank side. Wrap and hose grip bracket. Then wrap the flex hose around the Wrap the power cord around the Cord machine and snap hose grip into bracket. Wrap. www.BISSELL.ca... - Page 7 DO NOT BOIL OR MICROWAVE WATER. Replace tank by lining the bottom with Replace the plug by rotating into place indentations on machine. Push the top of and pressing gently onto tank. the tank into place until you hear a “click”. www.BISSELL.ca...
- Page 8 Hold the 3” Tough Stain Tool just above the carpet or upholstery to be cleaned. Let cleaning solution set for 5 minutes Press the trigger to mist solution over before cleaning. the soiled area. www.BISSELL.ca...
- Page 9 Set the tool directly on top of the carpet before pulling the spray trigger to inject formula deep into the carpet fibers. Always keep the tool in direct contact with carpeting to avoid over-spraying. NOTE: Ensure that the cleaning solution and water are in the tank before use. www.BISSELL.ca...
- Page 10 Pull the trigger to spray solution. Scrub and Dispose of used battery promptly. Keep suction the area to lift away from children. Do not disassemble and and remove the stain. do not dispose of in fire. www.BISSELL.ca...
-
Page 11: Maintenance & Care
NOTE: Store machine in protected, dry area at room temperature (40 degrees F to 110 degrees F). NOTICE To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result. www.BISSELL.ca... - Page 12 Rinse with water until all debris is removed and let air dry. Return the float stack to the Dirty Water Tank. Ensure float is installed before returning the float stack to the Dirty Water Tank. Turn the float stack clockwise to lock. www.BISSELL.ca...
- Page 13 Check the float stack for clogs and automatically reset and cleaning may remove debris. continue once plugged back in. NOTE: If the thermal protector continues to activate after following the above steps, your cleaner may need servicing. Call BISSELL® Consumer Care or visit the website. www.BISSELL.ca...
-
Page 14: Troubleshooting
Lift tool and point upwards to allow water in Cleaner hose to flow into the Dirty Water Tank. Won’t Pick Up Cleaning Incorrect cleaning formula. Use BISSELL® 2X Portable Machine formulas Solution only. Dirty Water Tank is improperly Remove Dirty Water Tank and reseat onto seated onto base. -
Page 15: Warranty
This warranty will only be valid if the what it may cover, please contact BISSELL® product is used in the same country in which Consumer Care by E-mail or telephone as it was sold. -
Page 16: Product Registration
We’ll contact you with any important product maintenance reminders and alerts. Visit BISSELL.ca/registration! Parts & Supplies For Parts and Supplies, go to www.BISSELL.ca and enter your model number in the search fi eld. We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation®...