Transferring Images; Disconnecting The Camera From Your Macintosh - Pentax Optio W80 Manual

e_kb485.book Page 241 Friday, July 3, 2009 9:18 AM

Transferring Images

Transfer the images captured with the camera to your Macintosh.
If there is no SD Memory Card in the camera, the images stored in the
built-in memory will be transferred to your Macintosh.
5
Specify a save location, make
sure that [Launch ACDSee] is
checked, and click [Download].
After images are copied to your
Macintosh, the "ACDSee 2 for Mac"
starts.
When [Delete images from device] is checked, images are deleted from
the camera after transfer is complete.

Disconnecting the Camera from Your Macintosh

1
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name
to the trash.
2
Disconnect the USB cable from your Macintosh and the
camera.
• If the camera (removable disk) is being used by an application such as
"ACDSee 2 for Mac", the camera cannot be disconnected until the
application is closed.
• The camera will automatically switch to the Playback Mode when the
USB cable is disconnected from your Macintosh or the camera.
8
241