Pentax Optio W80 Manual page 118

e_kb485.book Page 117 Friday, July 3, 2009 9:18 AM
6
Press the 3 button.
The camera returns to capture mode.
Refer to the following "Manual Setting" for instructions on adjusting the
white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.130).
Saving the White Balance setting 1p.143
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5
Press the 3 button.
The camera returns to capture mode.
White Balance
Adjust
SHUTTER
OK OK OK
MENU Cancel Cancel Cancel OK
3
117