Scan Service Settings; First Tab; Scan Defaults - Fuji Xerox Color 550 Administrator's Manual

Scan Service Settings

In [Scan Service Settings], you can configure settings related to the Scan services.
Note
The following shows the reference section for each setting.

First Tab ................................................................................................................................... 143

Scan Defaults............................................................................................................................ 143

Scan to PC Defaults.................................................................................................................. 145
Original Size Defaults .............................................................................................................. 145
Output Size Defaults ................................................................................................................ 146
Reduce/Enlarge Presets ............................................................................................................ 146
Other Settings........................................................................................................................... 146
1
On the [Tools] screen, select [System Settings] > [Scan Service Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.98).
2
Select an item to set or change.
First Tab
Feature in 2nd Column
You can set the features that appear in the second column of the lower part in the First Tab
screen.
You can select from [2 Sided Scanning], [Resolution], [Lighten/Darken], and [Reduce/
Enlarge].
Reduce/Enlarge - Buttons 2 to 5
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Select the magnification ratio displayed in [Reduce/Enlarge] from the Reduce/Enlarge
Presets registered.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.146).
Scan Defaults
You can set the default settings of the Scan services. When the machine is turned on,
or the machine exits the Energy Saver mode, or when the <Clear All> button is
pressed, the machine resets to the default values set here. Setting frequently used
features and values as the defaults can avoid extra operations required during the use
of the machine.
The values set here become valid after the machine turned off and then on.
For more information on each setting item, refer to "4 Scan" in the User Guide.
Color Scanning
Set the default value for [Color Scanning] in the First Tab.
Original Type
Set the default value for [Original Type] in the First Tab.
• This feature does not appear for some models. An optional component is required. For more
information, contact your local Fuji Xerox representative.

Scan Service Settings

143
5