Lorex LW1741 User Manual page 9

3
Installing the Camera(s)
To install the camera(s):
1. Use the included mounting screws to attach the camera stand(s) to the
mounting surface:
• Mark the positions of the screw holes on the mounting surface with the
base of the mounting stand.
• Drill holes and insert the drywall plugs (included) if installing on a dry-
wall surface.
• Firmly attach the camera(s) to the mounting surface using the included
screws.
Note
If you run the power cable through the mounting surface, connect power before at-
taching the camera to the wall.
2. Attach the camera stand(s) and antenna(s) to the camera(s).
#LX400030; r. 1.0/17112/17628; en-US
Wall Counter
5