Disassembly and Reassembly > Disassembly
(12) LCD Circuit Board, Backlight, 2.5 LCD Unit , and LCD Case B (Fig. 5-3-14)
LCD Circuit Board (a)
1) Unsolder the two points on LCD circuit board.
2) Disconnect the flat cable from LCD circuit board.
3) Remove screw [H], and then remove the LCD circuit board.
Backlight (b), 2.5 LCD Unit (c), and LCD Case B (d)
4) Release the two tabs on LCD frame (e), and then remove the LCD frame from LCD case B.
5) Remove the backlight and 2.5 LCD unit from LCD case B.
Note:
The 2.5 LCD unit and backlight are precision components: Take great care when handling them.
Subjecting them to impact could result in a fault.
(d)
[H] M1.7×3 (Gold)
Fig. 5-3-14 LCD Circuit Board, Backlight, 2.5 LCD Unit , and LCD Case B
(c)
(b)
2-1
2-1
2-2
5 - 12
4
(e)
(a)
(a) LCD Circuit Board
(b) Backlight
(c) 2.5 LCD Unit
(d) LCD Case B
(e) LCD Frame
1
3 [H]
2