Sony KDS-R50XBR1 Training Manual page 34

TVP-21
Optics Block , Power Supply Block , and Fan Assembly Removal
Locking
T1-Board
Lamp
Housing
Power Supply
Block
Slide to the Right
Lower Front cover
Do Not Touch
Screws
(cont.)
6
The Power Supply Block must
Tab
be removed with the Optics
Block because they are
attached by 1 internal screw
inside the Lamp Housing.
The left edge also blocks the
Optics Block from being
removed.
To remove the Lamp Housing
lift the locking tab on the top of
the cover and pull up and out .
7
The lower front cover must be
removed to access the screws
that secure the Optics Block in
place.
Remove 1 screw behind the
cover in the lower right hand
corner.
Slide front cover to the right
and remove.
Lamp
Remove the 4 screws
Housing
securing the Optics Block.
Screw
CAUTION:
6 screws mounted in the black
plastic under the lower front
cover
Disassembly Procedures
Do Not Touch the
31