TVP-21
Optics Block , Power Supply Block , and Fan Assembly Removal
Power Supply
Block
Screws
Bracket
Feed cabling
through the slot
(cont.)
4
Grasp the Fan assembly
and pull out to remove .
Optical
Block Cover
5
To access the Optics Block
the gray plastic cover must
first be removed.
Remove the 8 screws
securing the Optics cover.
Screws
Lift the 2 tabs, and carefully
slide cover back.
Also remove vertical bracket
(1 screw).
CAUTION:
Lift Tabs
Lift the C-Board cables and
carefully feed them through
the slot in the plastic cover.
Disassembly Procedures
30