Panasonic SC-VK950 Operating Instructions Manual page 9

Conserving power
The unit consumes a small amount of power (approx. 0.9 W) even when it is turned off with [^]. To save power
when the unit is not to be used for a long time, unplug it from the household AC socket. You will need to reset
some memory items after plugging in the unit.
Video cable
Component
video cable
S video cable
2
1
LOOP ANT
GROUND
For Southeast Asia
Before connecting the AC power supply cord, set the
voltage.
Voltage Selector
Use a flat-head screwdriver to set the voltage selector on the rear panel
to the appropriate position for the area in which this system is used.
■ Connecting a television with a VIDEO IN terminal
Television
VIDEO IN
VIDEO OUT terminal
Do not connect the unit through a video cassette recorder, because the
picture may not be displayed correctly due to the copy guard protection.
■ Connecting a television with COMPONENT VIDEO IN terminals
Television
COMPONENT VIDEO OUT terminals
COMPONENT
These terminals can be used for either interlace or progressive
VIDEO IN
output and provide a purer picture than the S VIDEO OUT terminal.
Y
Connection using these terminals outputs the color difference signals
(P /P ) and luminance signal (Y) separately in order to achieve high
P
B
B R
fidelity in reproducing colors. The description of the component video
P input terminals depends on the television or monitor (e.g. Y/P
R
Y/R-Y, Y/C /C
B
To enjoy progressive video
1. Connect to the component video input terminals on a 480p or
576p compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
2. Select "480p" or "576p" for Video Output Mode (Picture Menu,
➡ page 19).
Television
■ Connecting a television with an S VIDEO IN terminal
S-VIDEO
S VIDEO OUT terminal
IN
The S VIDEO terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
Black
White
Red
). Connect to terminals of the same color.
R
/P ,Y/B-
B R
AM loop antenna
Stand the antenna up on its
base.
Keep loose antenna cord
away from other wires and
cords.
9