Panasonic SC-VK950 Operating Instructions Manual page 22

Discs — Changing the player's settings
Picture/Video Output
Change the video signal format to be output for JPEG, MPEG4
and DivX video if picture output is not smooth during playback.
■ "Audio" tab
Dynamic Range Compression
(Dolby Digital only)
Speaker Settings (➡ see below)
Set the delay time for your center and surround speakers.
■ "Display" tab
Menu Language
Choose the language for these menus and the on-screen
messages.
On-Screen Messages
Choose whether to show on-screen messages or not.
Background during Play
Select background during JPEG, MPEG4 and DivX video
playback.
■ "Others" tab
DivX Registration
Displays the unit's registration code.
QUICK SETUP
Re-initialise Setting
This returns all values in the SETUP menus to the default
settings.
For optimum listening with 5.1 channel sound, all the speakers, except for the subwoofer, should be the same distance from the
seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make
up for the difference.
C
L
C
a
c
b
LS RS
LS
Circle of constant primary listening distance
If either distance or
the table and change to the recommended setting.
Center speaker
Difference Setting
(Approx.)
30 cm 1.0 ms
60 cm 2.0 ms
90 cm 3.0 ms
22
120 cm 4.0 ms
150 cm 5.0 ms
Changing the delay time (Speaker settings)
R
: Actual speaker position
: Ideal speaker position
: Primary listening distance
a b c
SW
Approximate room dimensions
RS
is less than , find the difference in
Surround speaker
Difference
(Approx.)
150 cm
300 cm
450 cm
For Southeast Asia
• PAL
• NTSC/PAL60: Output will depend on "NTSC Disc Output setting"
(➡ page 21).
For Australia and N.Z.
• Automatic
• Off
• On: Adjust for clarity even when the volume is low through
compressing the range of the lowest sound level and the highest
sound level. Convenient for late night viewing.
• Center (C) :
• Surround (LS/RS) :
(Actual languages depend on where you bought your system.)
For Southeast Asia
• English • 中文
For Australia and N.Z.
• English • Français • Deutsch • Italiano • Español
Nederlands • Português • Pуccкий
•
• On • Off
• Black • Grey
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content. (➡ page 33, About DivX VOD content)
• Yes • No
• Yes: The password screen is shown if "Ratings" (➡ "Disc" tab,
page 21) are set. Please enter the same password.
Turn the unit off and on again.
• No
1
Press [e, r] to select the delay time box and
press [ENTER].
2
Press [e, r] to adjust the delay time and press
[ENTER].
Exit
Setting
To finish the speaker setting
5.0 ms
Press [w] to select "Exit" and press [ENTER].
10.0 ms
15.0 ms
• PAL • NTSC/PAL60
0.0/1.0/2.0/3.0/4.0/5.0 ms
0.0/5.0/10.0/15.0 ms
Center delay time
L
R
C
ms
0.0
Exit
SW
ms
0.0
LS RS
Surround delay time