ODYSSEY SERIES FIREPLACE WITH GAS LOG SET
N. LOG REMOVAL/REPLACEMENT
Open the control access panel as shown in Figures 22 and 23 on page 21.
Remove the top right log. See Figure 35.
For removal of the grate/log assembly remove two screws (one per side) from the hearth pan. See Figure 36.
Lift up on the assembly to remove it from the fireplace and set it aside, being careful not to damage any of the logs. See
Figure 37.
Reverse the order to reinstall the logs
Visit our Website at www.heatilator.com for a dealer/distributor near you!
01/04
31818 Rev J
29