Konica Minolta bizhub C754e Specification & Installation Manual page 13

Konica Minolta bizhub C754e/C654e
Specification & Installation Guide
Component Considerations
FS-534 Staple Finisher
continued
PK-520 Punch Kit (For FS-534)
AU-202H AU-204H
AU-211P
FS-534 Staple Finisher + SD-511 Saddle Stitcher* A combination of FS-534 (see specs listed above) and SD-511 (specs listed below)
Staple Mode
Available Options
Power Requirements
Max. Power Consumption
Dimensions (W x D x H)
Weight Approx.
Consumables
AU-202H AU-204H
NOTE: FS-534 supports banner printing when installed on C754e/C654e.
AU-211P
Applicable
Number of holes
Support Paper Weight
Support Paper Size
Power Requirements
Dimensions (W x D x H)
Weight Approx.
Applicable
Number of bins
Paper types
Paper sizes
Number of Center Stapled
or Half-Folded Sheets
Number of
Tri-Folded Sheets
(Letter Only)
Staple mode
Maximum staple sheet
Dimensions (W x D x H)
Weight
Consumables
Power requirements
*NOTE: The SD-511 Saddle Stitcher is not available as a separate accessory.
Paper Sizes: 8.5" x 11" to 11" x 17"; Corner, 2 Position (Side, Top)
PK-520 Punch Kit (2/3-hole Punch)
Supplied from Main Unit
Less than 56 W
20.81" x 25.25" x 40.25"
(When tray is pulled out 25.88 (W)
88.188 lb.
SK-602 Staples (5,000 Staples x 3)
FS-534
2 or 3 holes
Thin Paper (14 lb. to 15 lb.), Plain Paper (15 lb. bond to 24 lb. bond),
Recycled Paper (15 lb. to 24 lb.),
2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Supplied from Finisher FS-534
2.375"x 19.375" x 5.563"
Approx. 3.938 lb.
FS-534
1 Tray
Thin Paper (14 lb. to 15 lb.), Plain Paper (15 to 24 lb),
Thick Paper 1/1+/2 (24.25 to 55.5 lb.)*
*Can only be used as a cover page.
12.25" x 18"L, 11" x 17", 8.5" x 14" L, 8.5" x 11",
Plain Paper (15 to 24 lb.)
1–3 Sheets: 20 Sets
4–10 Sheets: 10 Sets
11–20 Sheets: 5 Sets
1 Sheet: 30 Sets
2–3 Sheets: 10 Sets
Booklet, 2-point staple
20 sheets: (19 sheets/14 to 24 lb.) + (1 sheet/13 to 55.5 lb.)
8.25" x 21.875" x 21.563"
52.94 lb.
SK-602 (5,000 x 3 pkg/case)
Supplied from finisher
13