Mounting The Deflector; Mounting The Cutting Tools - Stihl FS 55 Instruction Manual

Mounting the Deflector

1
3
2
3
Mounting the deflector
1 = Deflector approved for all cutting
tools
2 = Deflector approved for use with
mowing heads only
:
Place the deflector on the
gearhead.
:
Fit the plate (3) and line it up.
: Insert M 5 x 18 screws and tighten
down firmly.
FS 55
4
4
1
5
Fitting skirt and blade
These parts must be fitted to the
deflector (1) when you use a
mowing head:
:
Slide the lower guide slot of the
skirt (4) onto the deflector (1) – it
must snap into position.
: Push the blade (5) into the upper
guide slot on the skirt and line it up
with the first hole.
:
Fit the screw and tighten it down
firmly.
English / USA

Mounting the Cutting Tools

Preparations
: Lay your brushcutter on its back
with the gearhead facing upward.
Mounting Hardware
for Cutting Tools
The mounting hardware supplied
depends on the cutting tool that comes
as original equipment with the new
brushcutter.
21