Mounting The Loop Handle - Stihl FS 55 Instruction Manual

13
14
13
Fitting the throttle cable
Do not kink the throttle cable - make
sure the throttle trigger moves freely.
:
Push the throttle cable (13) into the
retainer (14).
FS 55

Mounting the Loop Handle

14
2
Loop handle with barrier bar
:
Insert square nuts (1) in the
barrier bar (2).
:
Line up the holes.
1
1
: Place the clamp (3) in the loop
handle (4) and position them both
against the drive tube (5).
:
Fit the clamp (6) and place the
barrier bar (2) in position.
Note correct position.
:
Line up the holes.
:
Insert screws (7) in holes and screw
them into the barrier bar as far as
stop.
: Go to "Securing the loop handle".
English / USA
2
4
3
5
6
7
19