Radio Controls - Motorola PTX600 User Manual

Radio Controls

The numbers refer to the illustrations on page (ii).
1.
On/Off Volume Control
Turns the radio on/off and adjusts the volume
level.
2.
Shortform Dial or
Channel Selector (Conventional Mode)
(16 position)
3.
Three Colour Indicator (LED)
Green, Flashing: Scanning
Yellow, Slow Flashing: Call setup request
acknowledged by controller
Yellow, Fast Flashing: Call acknowledged by
recipient or Emergency call
Yellow, Continuous: Radio On Traffic Channel
Red, Continuous: Radio Transmitting
Red, Flashing: Channel Busy (Conventional)
4.
Accessory Connector
Connector for external headset or remote
speaker/microphone. Must be covered by
attached cap when not in use.
5.
Antenna Connector
6.
Clear Button
For cancelling a call, clearing down at the end of
a call or Carrier Monitor (Conventional).
2-Year Warranty
7.
Base Call Button
For making calls to preprogrammed numbers.
8.
Transmit (PTT) Button
Push to talk, release to listen.
Press continuous when using DTMF dialling.
9.
Numeric Display
Eight characters and icons.
Backlit when any button pressed.
10.
Edit Key/Call Clear
For correcting keypad entries, clearing
calls on a traffic channel and deselecting
call in absence interrogate mode.
11.
Keypad Up/Down
Used to select call in absence
interrogate mode and scroll through the
call in absence stack.
12.
Status Key
For sending status messages.
S
13.
Keypad
0 to 9 for entering digits.
for sending a call.
#
call modifier for priority, broadcast,
emergency and status calls.
Radio Controls 3
English