Installation Requirements - Ricoh FT5535 Service Manual

1. INSTALLATION REQUIREMENTS

1.1 ENVIRONMENT
1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. If the place of installation is air-conditioned or heated, place the machine:
a) where it will not be subjected to sudden temperature changes.
b) where it will not be directly exposed to cool air from an air conditioner.
c) where it will not be directly exposed to heat from a heater.
7. Do not place the machine where it will be exposed to corrosive gases.
8. Do not install the machine at any location over 2,000 m (6,500 feet) above
sea level.
9. Place the copier on a strong and level base.
10. Do not place the machine where it may be subjected to strong vibrations.
1.2 MACHINE LEVEL
1. Front to back:
2. Right to left:
FSM
10°C to 30°C (50°F to 86°F)
15% to 90% RH
Less than 1,500 lux (do not expose to direct
sunlight.)
Room air should turn over at least 3 m
Less than 0.10 mg/m
Within 5 mm (0.2") of level
Within 5 mm (0.2") of level
3-1
Rev. 7/95
3
/hr/person
3 -6 3
(2.7 x 10 oz/yd )
FT5535/4527/4522