Loading The Upper Rack; Loading The Bottom Rack; Loading The Cutlery Rack - Crosley ZDM6502AS Use & Care Manual

Loading the Upper Rack

The upper rack is designed for cups, glasses, small
plates, bowls and plastic items marked
safe etc.
For best results, place the bowls, cups, glasses, sauce
pans with soiled surface facing down or toward the
center. Tilt slightly for better drainage.

Loading the Bottom Rack

The bottom rack is designed to load plates, soup bowls,
plates,saucers and cookware. The adjustable rack
space willallow you to load maximum 13 inch items.
The fold-down tines in the bottom
load those extra large and hard-to-f it items.The tine s
may be left up for normal use or folded down for mor e
flexible loading. Fold down for more space to load
large pots or pans.

Loading the Cutlery Rack

Cutlery should be placed in the cutlery rack separately
from each other in the appropriate positions, and do
make sure the utensils do not nest together, this may
cause bad performance.
For a top quality cleaning, place the silverware in the basket
making sure that:
They do not nest together.
Silverware is placed with the male face up.
Long utensils in the middle.
rack make i t easy to
10
Make sure the loaded dishes do not
interfere with the rotation of the middle
spray arm, which is located at the bottom
of the upper rack. (Check this by rotating
the middle spray arm by hand.)
Large items should be placed along the edge
so they do not interfere with the middle spray
arm rotation, and make
prevent the detergent dispenser from opening.
Large items should be turned so that the
inside faces downward, and make sure these
items do not interfere with the
arm rotation.
sure they do not
lower spray