Effect Level; Effect: Source - Yamaha SY55 Product Manual

Summary: Individually sets the effect level for the
voice assigned to each multi-play channel.
Settings: 0 ... 100
Procedure: The and
to select the voice/channel for which the effect
level is to be set. The [DATA ENTRY] control, [-
1/NO] and [+1/YES] keys, or numeric and [EN-
TER] keys are used to set the effect level.
Summary: Determines whether the current multi-
play setup will have its own effect settings or
the effect parameters of one of the assigned
voices will be applied.
Settings: multi, CH1 ... CH16
Procedure: Use the [DATA ENTRY] control, [-1/NO]
and [+1/YES] keys, or numeric and [ENTER] keys
to select the desired setting.
Details: When "multi" is selected, independent ef-
fect parameters can be assigned to the current

EFFECT LEVEL

cursor keys are used

EFFECT: SOURCE

Details: A setting of "0" produces only the direct
sound of the selected voice, while a setting of
"100" produces maximum effect. Maximum ef-
fect is equivalent to the voice-mode EFFECT
BALANCE setting.
Refer to: Tutorial, page 25. "EFFECT BALANCE,"
page 63. "EFFECT: TYPE/OUTPUT LEVEL"
on page 85. "EFFECT: EFFECT PARAME-
TERS" on page 86.
multi-play setup via the following effect func-
tions. When a channel number between "CH1"
and "CH16" is selected, the effect parameters
from the voice assigned to the selected channel
number are applied to the current multi-play
setup. In the latter case, the following effect
functions are not available.
Refer to: "EFFECT: TYPE/OUTPUT LEVEL" on
page 85. "EFFECT: EFFECT PARAMETERS"
on page 86.
MULTI EDIT MODE
JOB7
JOB8
111